Clean-air protection
ISO Class 5 vertical laminar airflow supports sterile handling around the filling point.
Aseptic Sample Filling Module
Lab Aseptic Filling Cabinet
A controlled clean-zone cabinet for small-batch sterile filling and packaging development.
Clean zone
ISO Class 5 clean-air environment for aseptic sample filling and trial packaging workflows.
Equipment Role
Built for process decisions, not display-room demonstrations
A lab aseptic filling cabinet gives R&D teams a practical bridge between sterile process trials and sample packaging. It is suited to shelf-life screens, customer samples, packaging validation, and low-volume sterile filling after thermal processing.
Pilot packaging
Small-batch bottle, pouch, or sample filling can be adapted around trial packaging needs.
Sterilization support
UV, ozone, CIP, SIP, and optional gas flushing can be configured for the process route.
Configuration Notes
Specify the module around the trial evidence you need
Strong equipment selection starts with product behavior, utility limits, cleaning expectations, and the measurements required for scale-up.
Match the upstream line
Filling temperature, transfer route, hold time, and sterile connections should match the thermal process.
Control operator motion
Workflow layout, foot control, container staging, and reject handling affect contamination risk.
Plan package sterilization
Container treatment, cap handling, and environmental monitoring should be defined before trials.
Technical Snapshot
Key specifications to confirm before quotation
Values below are typical catalog-derived ranges and should be verified against the final process scope, product risk, and utility environment.
| Parameter | Typical specification |
|---|---|
| Cleanliness class | ISO Class 5 / Class 100 clean-zone target |
| Control mode | Foot-operated solenoid valve filling control |
| Cabinet size | Approximately 1-3 square meters, customized |
| Airflow | Vertical laminar airflow |
| Sterilization | UV and ozone options |
| Cleaning | CIP and SIP support, configuration dependent |
| Gas flushing | Optional nitrogen or carbon dioxide flushing |
| Typical containers | Small bottles, sample containers, pouches, or trial packages |
| Use case | Sterile samples for shelf-life and customer evaluation |
Applications
Where this equipment usually creates useful pilot data
Use these application routes as starting points, then refine the configuration around viscosity, particles, heat sensitivity, oxygen exposure, and cleaning difficulty.
Aseptic beverage samples
Lab Aseptic Filling Cabinet can be configured to support aseptic beverage samples trials with controlled process conditions and sample collection.
Dairy trial packs
Lab Aseptic Filling Cabinet can be configured to support dairy trial packs trials with controlled process conditions and sample collection.
Shelf-life studies
Lab Aseptic Filling Cabinet can be configured to support shelf-life studies trials with controlled process conditions and sample collection.
Customer sample preparation
Lab Aseptic Filling Cabinet can be configured to support customer sample preparation trials with controlled process conditions and sample collection.
Packaging development
Lab Aseptic Filling Cabinet can be configured to support packaging development trials with controlled process conditions and sample collection.
Sterile ingredient trials
Lab Aseptic Filling Cabinet can be configured to support sterile ingredient trials trials with controlled process conditions and sample collection.
RFQ
Discuss a Lab Aseptic Filling Cabinet configuration
Prepare product type, batch size, target throughput, temperature or pressure range, cleaning requirements, utilities, and the data you need from the trial.
Send an RFQ brief
A concise RFQ brief helps turn this equipment page into a usable configuration discussion.