High-pressure control
Up to 600 bar pressure range supports emulsion and particle size studies.
High-Pressure Homogenization Module
Inline Lab Homogenizer
A compact inline homogenization module for particle size, emulsion stability, and texture trials.
Pressure range
Adjustable homogenization pressure up to 600 bar with two-stage configuration options.
Equipment Role
Built for process decisions, not display-room demonstrations
The inline lab homogenizer is built for process teams studying stability, mouthfeel, droplet size, and dispersion behavior. It can be installed as a stand-alone module or paired with thermal processing equipment for complete pilot-line validation.
Low trial volume
Approximate minimum processing volume from 0.5 L, depending on setup and circulation plan.
Hygienic integration
SS316L contact parts, PLC touch operation, CIP, and SIP support pilot-line use.
Configuration Notes
Specify the module around the trial evidence you need
Strong equipment selection starts with product behavior, utility limits, cleaning expectations, and the measurements required for scale-up.
Start with particle limits
Feed particle size and hardness protect the valve assembly and improve repeatability.
Track temperature rise
Homogenization can add heat, so cooling and sample timing should be planned.
Define stability metrics
Set droplet size, sedimentation, viscosity, sensory, and shelf-life targets before trials.
Technical Snapshot
Key specifications to confirm before quotation
Values below are typical catalog-derived ranges and should be verified against the final process scope, product risk, and utility environment.
| Parameter | Typical specification |
|---|---|
| Pressure range | 0-600 bar adjustable |
| Homogenization stages | Two-stage configuration |
| Minimum processing volume | From approximately 0.5 L, configuration dependent |
| Maximum feed particle size | Up to about 500 microns |
| Contact material | SS316L |
| Controls | PLC touch operation |
| Cleaning | CIP and SIP compatible |
| Power reference | Approximately 1.5 kW, configuration dependent |
| Footprint | Approximately 0.3-1 square meter |
Applications
Where this equipment usually creates useful pilot data
Use these application routes as starting points, then refine the configuration around viscosity, particles, heat sensitivity, oxygen exposure, and cleaning difficulty.
Dairy emulsions
Inline Lab Homogenizer can be configured to support dairy emulsions trials with controlled process conditions and sample collection.
Plant-based drinks
Inline Lab Homogenizer can be configured to support plant-based drinks trials with controlled process conditions and sample collection.
Nutritional beverages
Inline Lab Homogenizer can be configured to support nutritional beverages trials with controlled process conditions and sample collection.
Sauces and dressings
Inline Lab Homogenizer can be configured to support sauces and dressings trials with controlled process conditions and sample collection.
Ingredient dispersions
Inline Lab Homogenizer can be configured to support ingredient dispersions trials with controlled process conditions and sample collection.
Texture and mouthfeel trials
Inline Lab Homogenizer can be configured to support texture and mouthfeel trials trials with controlled process conditions and sample collection.
RFQ
Discuss a Inline Lab Homogenizer configuration
Prepare product type, batch size, target throughput, temperature or pressure range, cleaning requirements, utilities, and the data you need from the trial.
Send an RFQ brief
A concise RFQ brief helps turn this equipment page into a usable configuration discussion.